Nanyang Technological University Print Page

News & Events



​NTU unveils Singapore's first 3D printed car

Published on: 04-Feb-2015


eco cars.jpg 

Two new eco-cars to race at Shell Ec​o-marathon Asia 

Nanyang Technological University (NTU) students have built Singapore’s first urban solar electric car with an innovative 3D-printed body shell that has 150 parts.

Mounted on a carbon fibre single shell chassis, the NTU Venture (NV) 8 will race in the Urban Concept category at this year’s Shell Eco-marathon Asia.

NTU students have also built the NTU Venture (NV) 9, a slick three-wheeled racer which can take sharp corners with little loss in speed due to its unique tilting ability inspired by motorcycle racing.​

NV9, featuring hand-made silicon solar cells, will be NTU’s entry in the Prototype category at the Shell Eco-marathon Asia which will take place in Manila from 26 Feb to 1 March.

Designed from scratch by NTU undergraduates and built over a year, these two eco-cars will aim to attain the highest fuel efficiency.

Associate Professor Ng Heong Wah, who mentored the two teams, said the students had taken a leap of faith and decided to go with disruptive innovations instead of making improvements over the previous versions.

“Using the latest engineering techniques learnt from their studies in NTU, the students have developed innovations such as silicon solar cells that can be contoured to follow the car’s shape. This allows for maximum harvesting of the solar energy and a tilting mechanism in NV9 that can ‘lean’ in the direction of the turn to avoid losing speed,” Prof Ng said.

“We are extremely proud to have designed and assembled a 3D printed body shell for the electric car, which is Singapore’s first and probably Asia’s first 3D-printed concept car,” said Prof Ng. “The 3D printed car body was pushing existing technology to the limits and we are so pleased that it has paid off.”

Ilmi Bin Abdul Wahab, a year 4 computer engineering student who led the development of 3D-printed NV8, said, “We decided to go with a 3D-printed cabin made from lightweight plastic, as we wanted to maximise the internal space and driver’s comfort while still being able to keeping the weight to a minimum. Despite being an Urban Concept car, it is no slouch and can reach a top speed of 60 kilometres per hour, while maintaining low energy consumption.”

Team Manager of the three-wheeler NV9 team Winston Tan, a final-year electrical and electronic engineering student said, “We took our inspiration for the tilting mechanism from motorcycle racing, where racers would lean left or right during sharp turns to maintain their handling and speed. For the car’s body, we aimed for it to be as streamlined as possible. The resulting design looks like a fusion between a F1 race car and a glider plane, with an all surround canopy for increased visual awareness.”

An interdisciplinary and multi-partner collaboration

The two NTU teams consist of 16 students from the various engineering schools. Over a year, they had built the cars at the Innovation Lab housed at the School of Mechanical and Aerospace engineering.

With as many as 150 parts that had to be 3D-printed, the students collaborated with various NTU schools and research centres, as well as sponsors and institutions such as Stratasys, Creatz3D and The Singapore-MIT Alliance for Research and Technology (SMART).

The designer of the NV8 electric car, mechanical engineering student Kam Sen Hao, said, “Initially we wanted a supercar concept, but after taking into consideration the dimensional requirements for the competition, we ended up with a sensible cute micro-car with vertical opening doors, which will appeal to all ages.”

His co-designer, also from mechanical engineering, Ng Jun Wen, said it was a challenge to assemble the shell of the car which was produced in different parts separately by the various 3D printers at NTU and at other sponsor companies. The printing and assembly took the team three months’ worth of effort.

“For it to be lightweight, thin and yet strong, we integrated a honeycomb structure and a unique joint design to hold the parts together. When seen against the light, the structure has a translucent see-through effect, like a dragonfly wing. It is a sight to behold!” Ng said. 

With annual events first in Asia, then the Americas and Europe, the Shell competition challenges students to design, build and drive a vehicle that can travel the furthest distance using the least amount of energy.

“For Shell, sustainable mobility means helping our customers to be more fuel efficient while finding new innovations to deliver a cleaner transport system for tomorrow.  The Shell Eco-marathon plays an important part by inspiring young generations of engineers and scientists to think creatively about fuel efficiency, and to put new ideas into practice,” said Mr Jason Leow, General Manager, Communications, Shell Singapore.

Participating teams may enter vehicles using any of the following seven energy types: hydrogen (fuel cell), battery electric, gasoline, diesel, Shell Gas to Liquids (GTL), compressed natural gas (CNG) and Ethanol E100.

Student teams participate in either the Prototype or Urban Concept categories. For the Prototype category, teams enter futuristic prototypes focused on maximising fuel efficiency through innovative design elements. For the Urban Concept category, teams enter more "roadworthy" fuel-efficient vehicles.




 Other related articles:

​- 3D printed green car to blaze a trail (The Straits Times)

- The fast and the futuristic (TODAY)

- NTU successfully developed the first eco-friendly vehicle with 3D printed parts in Singapore (My Paper, Chinese)

- NTU eco-friendly concept vehicle with 3D printed plastic parts and carbon-fibre chassis (Lianhe Zaobao)

- Singapore's first 3D-printed concept car to debut in design competition (TODAY online)

- NTU develops Singapore's first 3D-printed urban solar electric car (Channel NewsAsia online)

- NTU builds Singapore's first 3D-printed concept car (AsiaOne)

- Singapore students 'print' solar powered car (The Express Tribune with the International New York Times)

- Students build solar car with 3D-printed body (

- This 3D Printed Car From NTU is Set To Be The Eco-Friendly Vehicle Of Your Dreams (Vulcan Post)

- S'pore's first 3D car put together like Lego (The New Paper)

- 3-D Printed Electric Cars: NTU students develop Singapore's first 3-D printed concept car (On Cars India)

- Could the car of the future be 3D printed? (Eco-Business)

- Singapore university unveils Asia's first 3D-printed concept car (Plastics Today)

- Singapore's First 3D- Printed Solar Cars (Energy Matters)

- Singapore's first 3D-printed concept car dveloped (Economic Times)

- NTU Students Build Singapore's First Urban Solar Electric Car Out of 3D Printed Parts (Crazy Engineers)

- Student's Build Solar Car with 3D Printed Body (  

- NTU Young Innovators Build Solar Electric Car Body Using 3D- Printing Technology (Yibada)

- NTU unveils Singapore's first 3-D printed concept car (PhysOrg)

- Singapore's first 3D-printed urban electric car and tilting three-wheeler ready to race (Gizmag)

- Singapore Students Build 3D-Printed Electric Car (PCMag)

- 3D Printed Solar Car Prototypes Created By University Students (Ubergizmo)

- 3D-Printed Electric Cars Built By Singapore Students (Valuewalk)


Video coverage:

- NTU students build 3D-printed solar electric car (NTUsg YouTube Channel)

- Tomorrow Daily: 3D-printed solar car (CNet)

Back to listing